|
American Defence 68 Standard
The AD-68H High Profile Aimpoint mount features a lower 1⁄3rd co-witness when used on an AR15, M16, M4 flat top with Mil-Spec size iron sights. It is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock™ Lever system to accommodate both in spec and out of spec rail systems.
More Info
CAD $109.95
|
AD-68-Standard
|
|
|
American Defence AD-B4
The AD-B4 modular base is the largest base in our modular lineup. Standalone it is a fullsize ACOG mount. Alternatively it can accept several different risers to accomodate a variety of uses. It is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock™ Lever system to accommodate both in spec and out of spec rail systems.
More Info
CAD $89.95
|
AD-B4
|
|
|
American Defence RMR-CO
The AD-RMR-CO mini mount was designed to mount the Trijicon RMR to a Picatinny rail and provide a co-witness iron sight picture. It is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock™ Lever system to accommodate both in spec and out of spec rail systems.
More Info
CAD $88.00
|
AD-RMR
|
|
|
American Defence Recon 1"
The AD-RECON mount is made for putting high power glass onto a flattop style AR-15. The cantilever throws the scope out front, allowing you to get the right eye relief. It is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock™ Lever system to accommodate both in spec and out of spec rail systems.
More Info
CAD $189.95
|
AD-Recon1
|
|
|
|
American Defence Recon 30mm
The AD-RECON mount is made for putting high power glass onto a flattop style AR-15. The cantilever throws the scope out front, allowing you to get the right eye relief. It is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock™ Lever system to accommodate both in spec and out of spec rail systems.
More Info
CAD $189.95
|
AD-Recon30
|
|
|
American Defence Recon-SW 30mm
The AD-RECON-SW mount is made for putting high power glass onto a flattop style AR-15. This is a straight up mount with no forward offset. The rings are spaced to fit the wide Schmidt & Bender scopes. It is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock™ Lever system to accommodate both in spec and out of spec rail systems.
More Info
CAD $185.95
|
AD-Recon-SW30mm
|
|
|
|
American Defence Recon-X 1"
Similar to the AD-RECON, the AD-RECON-X mount is made for putting high power glass onto a flattop style AR-15. The cantilever on the AD-RECON-X provides extended eye relief over the AD-RECON model. It is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock™ Lever system to accommodate both in spec and out of spec rail systems.
More Info
CAD $199.95
|
AD-Recon-X1
|
|
|
|
American Defence Recon-X 30mm **SOLD OUT**
Similar to the AD-RECON, the AD-RECON-X mount is made for putting high power glass onto a flattop style AR-15. The cantilever on the AD-RECON-X provides extended eye relief over the AD-RECON model. It is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock™ Lever system to accommodate both in spec and out of spec rail systems.
More Info
CAD $199.95
|
AD-Recon-X 30
|
|
|
American Defence T1-10
The Aimpoint T1 Micro Mount 1 Piece is a one piece unit that places the optic in a true co-witness height. It is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock™ Lever system to accommodate both in spec and out of spec rail systems.
More Info
CAD $92.00
|
AD-T1-10
|
|
|
American Defense AD-15-R
The Trijicon Reflex Mount is a low mount for the Trijicon Reflex sighting device. This combination of mount and optic provide any shooter with a superb, accurate sighting system. It is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock™ Lever system to accommodate both in spec and out of spec rail systems.
More Info
CAD $119.95
|
AD-15-R
|
|
|
American Defense AD-25
The AD-25 Bi-Pod Mount was designed as a quick detach solution for the Tango Down Bi-Pod. It is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock™ Lever system to accommodate both in spec and out of spec rail systems.
More Info
CAD $87.00
|
AD-25
|
|
|
American Defense AD-68 Cantilever
The AD-68C Cantilever Aimpoint mount features a lower 1⁄3rd co-witness when used on an AR15, M16, M4 flat top with Mil-Spec size iron sights. It is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock™ Lever system to accommodate both in spec and out of spec rail systems.
More Info
CAD $139.95
|
AD-68C
|
|
|
American Defense AD-68 High
The AD-68H High Profile Aimpoint mount features a lower 1⁄3rd co-witness when used on an AR15, M16, M4 flat top with Mil-Spec size iron sights. It is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock™ Lever system to accommodate both in spec and out of spec rail systems.
More Info
CAD $109.95
|
AD-68H
|
|
|
American Defense AD-68 Low
The AD-68H High Profile Aimpoint mount features a lower 1⁄3rd co-witness when used on an AR15, M16, M4 flat top with Mil-Spec size iron sights. It is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock™ Lever system to accommodate both in spec and out of spec rail systems.
More Info
CAD $109.95
|
AD-68L
|
|
|
American Defense AD-T1-11
The Aimpoint T1 Micro Mount 1 Piece is a one piece unit that places the optic in a SOCOM height. It is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock™ Lever system to accommodate both in spec and out of spec rail systems.
More Info
CAD $92.00
|
AD-T1-11
|
|
|
American Defense Recon-H 30mm
The AD-RECON-H mount is made for putting high power glass onto a flattop style AR-15. The cantilever throws the scope out front with 2″ offset, allowing you to get the right eye relief. It is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock™ Lever system to accommodate both in spec and out of spec rail systems.
More Info
CAD $195.95
|
AD-ReconH30mm
|
